Before You Begin
-2-
COLORado™ Zoom Tour WW User Manual Rev. 05
Product at a
Glance
Use on Dimmer
Auto Programs
Outdoor Use
Auto-Ranging Power Supply
Sound Activated
Replaceable Fuse
DMX
User Serviceable
Master/Slave
Duty Cycle
Safety Notes
Read all the following Safety Notes before working with this product. These notes include
important information about the installation, usage, and maintenance of this product.
There are no user-serviceable parts in this product. Any reference to servicing in
this User Manual applies only to properly certified CHAUVET® technicians. Do not
open the housing or attempt any repairs unless you are certified by CHAUVET®.
Please refer to all applicable local codes and regulations for proper installation of
this product.
Personal Safety
Avoid direct eye exposure to the light source while the product is on.
Always disconnect this product from its power source before servicing.
Always connect this product to a grounded circuit to avoid the risk of electrocution.
Do not touch this product’s housing when operating because it may be very hot.
Mounting and
Rigging
This product is for indoor use only! To prevent risk of fire or shock, do not expose this
product to rain or moisture.
Make sure there are no flammable materials close to this product while it is operating.
When hanging this product, always secure to a fastening device using a safety
chain/cable (included).
Power and Wiring
Always make sure you are connecting this product to the proper voltage, as per the
specifications in this manual or on the product’s specification label.
Never connect this product to a dimmer pack or rheostat.
Never disconnect this product by pulling or tugging on the power cable.
Operation
Do not operate this product if you see damage on the housing, lenses, or cables. Have
the damaged parts replaced by an authorized technician at once.
Do not cover the ventilation slots when operating to avoid internal overheating.
The maximum ambient temperature is 104° F (40° C). Do not operate this product at a
higher temperature.
In case of a serious operating problem, stop using this product immediately!
In the unlikely event that your CHAUVET® product may require service, contact
CHAUVET® Technical Support.
Expected LED
Lifespan
LEDs gradually decline in brightness over time, mostly because of heat. Packaged in
clusters, LEDs exhibit higher operating temperatures than in ideal, single LED conditions.
For this reason, using clustered LEDs at their fullest intensity significantly reduces the
LEDs’ lifespan. Under normal conditions, this lifespan can be 40,000 to 50,000 hours. If
extending this lifespan is vital, lower the operating temperature by improving the
ventilation around the product and reducing the ambient temperature to an optimal
operating range. In addition, limiting the overall projection intensity may also help to
extend the LEDs’ lifespan.
