Operation
-10-
COLORado™ Zoom Tour WW User Manual Rev. 05
DMX Control
In this mode, each product will respond to a unique starting address from the DMX
controller. All products with the same starting address will respond in unison.
1. Select a DMX personality as described in
DMX Personality
.
2. Set the running mode:
a. Go to the
RUN
main level.
b. Select the
DMX
programming level.
3. Set the starting address:
a. Go to the
DMX
main level.
b. Select the starting address (
001~512
).
The highest recommended starting address for each DMX mode are as follows:
DMX Mode
DMX Address
STD.W
508
STD.P
510
UNO
512
Loss of Signal
Setting
This setting controls how the product will respond when the DMX signal is lost.
1. Go to the
SET
main level, then select
DERR.
a. Select
SAVE
to make the product use the last command used when the signal is
lost.
b. Select
BLAC
to turn off the all the LED’s when the signal is lost.
