Page 34 of 40
Operation
COLORado PXL Bar 16 User Manual Rev. 1
Dimmer Speed
To set the dimmer speed, do the following:
1. Go to the
Setup
main level.
2. Select
Dimmer Speed
.
3. Select
Smooth
or
Fast
.
LED Frequency
This option changes the Pulse Width Modulation (PWM) frequency of the LEDs on the COLORado PXL Bar 16.
1. Go to the
Setup
main level.
2. Go to the
PWM Option
main level.
3. Select PWM frequency (
600Hz
,
1200Hz
,
2000Hz
,
4000Hz
,
6000Hz
, or
25Khz
).
Cell Order
To set how the light is activated, follow the instructions below:
1. Go to the
Setup
main level.
2. Select
Cell Order
.
3. Choose
1–16
(light activates from left to right) or
16–1
(light activates from right to left).
Calibrated White
When activated, calibrated white sets the light output temperature to 7500K. To set the calibrated white
setting, do the following:
1. Go to the
Setup
main level.
2. Select
Calibrated White
.
3. Select
ON
(activates calibrated white),
OFF
(deactivates calibrated white), or
Custom
(adjust light
output temperature using the White Balance setting).
White Balance
To set the maximum values of a given LED color to create a white light output, follow the instructions below:
1. Go to the
Setup
main level.
2. Select
White Balance
.
3. Select the color value to be changed (
Red
,
Green
,
Blue
, or
White
).
4. Set the color value,
000–255
.
Preset Functions
The COLORado PXL Bar 16 has three presets. Every time a settings is changed in the fixture, the current
preset is updated to include that change. To load a preset, do the following:
1. Go to the
Setup
main level.
2. Select
Preset Select
.
3. Select the preset to load (
PRESET A
,
PRESET B
, or
PRESET C
).
4. The selected preset will load, and all changes made to the settings will save to that preset.
Presets can be uploaded to other COLORado PXL Bar 16 using a DMX connection. To do so:
1. Connect the DMX Out of the product that has the desired presets to the DMX In of the product to
be updated.
2. Power on both products.
3. On the product with the desired presets, go to the
Setup
main level.
4. Select
Preset Sync
.
5. Select
NO
(do not upload settings) or
YES
(upload settings).
Reset Functions
To reset the tilt, zoom, or all functions as if from startup, follow the instructions below:
1. Go to the
Setup
main level.
2. Select
Reset Function
.
3. Select the function to be reset (
Tilt
,
Zoom
, or
All
).
4. Select
NO
(do not reset) or
YES
(reset).
Factory Reset
To restore the COLORado PXL Bar 16 to factory default settings, do the following:
1. Go to the
Setup
main level.
2. Select
Factory Settings
.
3. Select
NO
(do not reset) or
YES
(reset to factory default settings).
