Page 32 of 40
Operation
COLORado PXL Bar 16 User Manual Rev. 1
Configuration
Test Mode
Auto Test
To perform an auto test of the COLORado PXL Bar 16, follow the instructions below:
1. Go to the
Run Mode
main level.
2. Select
Auto Test
.
Manual Test
To test the functions of the COLORado PXL Bar 16 manually, do the following:
1. Go to the
Run Mode
main level.
2. Select
Manual Test
.
3. Select the function (
Tilt
,
P/T Speed
,
Red
,
Green
,
Blue
,
White
,
CTC
,
Color
,
Pattern
,
LED Macro
,
LED Ma. Speed
,
LED Ma. Fade
,
Background
,
Background Dim.
,
Dimmer
,
Shutter
,
Function
,
Zoom1
, and
Zoom2
) to test.
4. Change the value of the tested function,
000–255
.
Setup
Network Settings
To adjust the IP Mode, IP Byte, and SubMask settings, follow the instructions below:
1. Go to the
Setup
main level.
2. Select
Network Settings
.
IP mode
The IP address of the COLORado PXL Bar 16 can be set manually, by the network, or to a preset static
address specific to each product. To set the IP Mode, do the following:
1. Navigate to
Network Settings
.
2. Select
IP Mode
.
3. Select among:
•
Manual
– set the IP address with the control panel
•
DHCP
– the network sets the IP address
•
Static
– a preset address specific to each product
IP byte
In Manual IP Mode, the IP address must be assigned using the product menu. To set the IP address in
Manual IP Mode, follow the instructions below:
1. Navigate to
Network Settings
.
2. Select
IP
.
3. Select from
IP Byte 1
to
4
.
4. Change the value of each IP Byte,
000–255
.
Subnet mask
In Manual IP Mode, the Subnet Mask must be assigned using the product menu. To set the Subnet Mask
in Manual IP mode, do the following:
1. Navigate to
Network Settings
.
2. Select
SMK
.
3. Select from
SubMask 1
to
4
.
4. Change the value of each SubMask,
000–255
.
Tilt Orientation
To set whether the tilt orientation is normal or inverted, follow the instructions below:
1. Go to the
Setup
main level.
2. Select
Tilt Reverse
.
3. Select
NO
(normal tilt) or
YES
(reversed tilt).
Zoom Orientation
To set whether the zoom goes from wide to narrow or from narrow to wide, do the following:
1. Go to the
Setup
main level.
2. Select
Zoom Reverse
.
3. Select
NO
(wide to narrow) or
YES
(narrow to wide).
