Connecting (Cabling) Each PVP™
14-
PVP™ Series User Manual, Rev. 4
6. Connecting (Cabling) Each PVP™
Testing Signal and
Power Connections
Each PVP™ has 2 power sockets and 2 signal sockets.
•
The Power
IN
and Signal sockets are located on the upper right-hand corner of each
panel.
•
The Power
OUT
and Signal sockets are located on the lower right-hand corner of
each panel.
•
The Signal sockets may be used interchangeably.
•
Each PVP™ has LED indicator lights.
•
Each panel indicates a successful power connection when the Power indicator light
remains red.
•
Each panel indicates video signal reception when the Signal LED indicator light blinks
green. This light should be blinking to indicate good reception.
Using the PVP™
Test button
Each PVP™ also has a Test button, used to ensure all LEDs are functional. Use the
Test button on each panel to perform a self-test. If self-testing, you must perform the test
individually for each PVP™. You do not need to connect to a signal or use software.
When using the Test button, make sure the PVP™ is not connected to the VIP™
Driver.
To use the Test button, you must connect the power, but
do not
connect the signal
cables. Press the Test button to toggle through various LED light display configurations.
Rear Panel View
Underside of Rear View
Power Out
Power In
Power LED indicator
Test Button
Signal LED indicator
Signal Connection
Signal LED indicator
Summary of Contents for PVP S5
Page 1: ...User Manual Series ...
Page 112: ...Contact Us ...
