Chauvet Professional PVP S5, User Manual

Page: 29 / 112

Typical PVP™ Installation
PVP™ Series User Manual, Rev. 4 19
7. Typical PVP™ Installation
Because a video wall system can include different components to provide a simple to complex modular wall design, use
the following steps as a general guide to get started.
Step 1
Open and examine the PVP™ flight case to make sure you have received all products and
accessories and that each one is in good condition.
Step 2
Apply power and run the self-test for each PVP™ to ensure all LEDs and inside connections
in each panel are working (optional).
Step 3
Create a stable mounting surface (i.e., truss or other stable surface) for PVP™ mounting.
Step 4 Mount the first top row of the PVP™s. Refer to the Mounting section in this User Manual.
Step 5
Adjust the alignment of the first row using the speego connectors.
Step 6 Connect the signal source to the VIP™ Driver. Connect the VIP™ Driver to the VIP™ Signal
Distributor (if applicable).
Step 7 Connect either VIP™ Driver or VIP™ Signal Distributor (if being used) to the Input Signal
socket of the first panel in your connection chain.
Step 8
Based on your video wall configuration (design), join each panel, either horizontally or
vertically, using the instructions in the section,
Joining Each PVP™ (Creating a Modular
Design) .
Refer to the instructions and information in the section of this User Manual, Connecting
(Cabling) Each PVP™ .