Operator manual Cube 13-00170-US Rev C
Page 33 of 51
5.4.2 Patients
After choosing Patients, you can enter in the following screen.
A quick touch of the chosen patient, allows you to enter in the
multi choice screen (treatment repetition, view history and delete).
Press it to go back one screen.
Arrows used to scroll forward and
backwards, if more than one page on the list
is present.
Press it to create a new patient.
Select body mass, skin
type and write the patient’s
name. Press OK to confirm the patient’s folder
creation.
Notice
The device is able to store all the steps performed by the
operator during the device use.
Notice
The device stores body mass and the skin type of all the patients.
After patient’s creation,
these parameters are no longer required. However they can always be modified if needed.
Notice
At the selection of an already created patient, the device will show the main menu. In this way
the operator can select the body part to be treated. After that the operator can set the
treatment from the
patient’s chronicity / pain level matrix.
Notice
At the selection of an already created patient with an already performed treatment, the device
will directly show the patient’s chronicity / pain level matrix.
Notice
In order to have the history of the performed treatments, the patient must be created before
the treatment execution. For instance, if a treatment is performed before the patient creation,
at the save button pressure, the device will limit to only the patient creation.
On the contrary, the patient creation and the following treatment execution, will allow the
device to memorize the history of the performed treatment.
After the matrix selection, the device will show the following screen.
A first pressure
allows the operator to come back to patient’s
matrix.
A second pressure
allows the operator to come back to the
patient’s main menu.
Press it to the main menu.
