Operator manual Cube 13-00170-US Rev C
Page 14 of 51
Part Description
DJO Part Number
Distal piece 40 mm MED
MP474-USA
Optical Plus 40mm (without distal)
MP553-USA
Optical part of zoom PLUS (without distal)
MP554-USA
Optical part of zoom PLUS with distal MED
MP555-USA
Class 4 label, visible/invisible - if open
MP263-USA
Class 4 label, visible/invisible
MP264-USA
Label, use Sinpro MPU100-106
MP473-USA
Label, power and wavelength C4
MP355-USA
Label, power and wavelength C3
MP354-USA
4.3 Power supply
Connect the power cable to the DC IN socket at the back of the device.
Caution
The device may only be operated with the Sinpro MPU100-106 power supply. Operation with
other power supplies may result in failure or destruction of the laser unit. If any power supply
other than the one recommended is used, the approval of the entire unit automatically
becomes void and the warranty expires.
Warning
The use of any power supplies other than the one recommended may cause overheating and
failure of the laser unit or damage of batteries.
The device is supplied with a rechargeable battery and therefore can be used without connected
power cable. The status of the rechargeable battery and whether the power cable is actually
connected will be always displayed on the touch screen.
Notice
There is a warning if the rechargeable battery reaches a low level of capacity.
Notice
While operating, should the charge level of the battery be below 5%, the green led will flash at
5 “ intervals to remind the user to plug in the unit.
The device is fully functional and can be run while charging the battery.
Charge the battery completely.
Notice
The rechargeable battery must be fully charged regularly. After 6 months the rechargeable
battery might lose its loading capacity. If left discharged for longer than 6 months, it may not be
rechargeable anymore.
