9
Getting Started
Tools Required
1.
Utility Knife
a.
For removing stretch wrap from around cabinet
2.
13 mm Socket Wrench
a.
For removing shipping brackets securing cabinet to pallet
b.
For adjusting equipment mounting rail
c.
For installing baying brackets
3.
13 mm Open End Wrench
a.
For adjusting leveling feet
4.
8mm Socket or Open End Wrench
a.
For installing ground terminal block
5.
#2 Phillips Screwdriver
a.
For installing M6 screws into cage nuts to secure equipment in mounting rails
b.
For removing and installing door hinges
c.
For installation and removal of PDU brackets
6.
5mm Ball Hex Driver with 12”L (300 mm) shaft (CPI, P/N 39150-‐001, ordered separately)
a.
For adjusting leveling feet
Unpacking
CAUTION
: The GlobalFrame cabinet is heavy. Use a minimum of two (2) people to
unpack and remove the cabinet from the pallet.
CAUTION:
The GlobalFrame casters are for moving the cabinet short distances over
smooth floor surfaces only. Move shipping pallet as close as possible to the final
installation location before unpacking.
CAUTION:
The GlobalFrame casters are not intended to support cabinet loads for
extended periods of time. Always level and anchor the cabinet after positioning.
