10
Inspect the cabinet for damage. If any damage to the cabinet is observed, contact your distributor or
CPI Customer Service.
1.
Carefully remove the plastic wrap surrounding the cabinet using a utility knife. Be careful not to
allow the knife to contact the cabinet as this may damage the unit.
2.
Remove the four (4) cardboard corner protectors.
3.
Inspect inside the cabinet to insure all items are securely fastened to the cabinet. Remove any
items that were shipped inside the cabinet but are not fastened to the cabinet.
4.
Remove the (4) anchor brackets that attach the cabinet to the pallet using a 13 mm (1/2”) socket
wrench and the shipping bracket under the front door.
NOTE
: Do not discard the (4) anchor brackets. These brackets are used to anchor the
cabinet to the floor. See “Anchoring the cabinet to the floor” .
5.
Remove the cabinet from the pallet. For Shock Pallet Cabinets (P/N GF-‐XXXX3-‐XB) that are loaded
with equipment use the Ramp Kit (P/N 39207-‐701, ordered separately) to roll the cabinet off the
pallet.
RECYCLABLE MATERIALS
: CPI uses only recyclable materials in all of its cabinet
packaging. Please save packaging for later use or dispose of properly. All wood
components of CPI pallets have been properly treated to comply with the pest-‐free
certifications required by foreign countries.
6.
If the cabinet is to be reshipped, save all packaging materials for reuse.
DISCLAIMER
: CPI is not responsible for any damage to the cabinet or its contents after
the cabinet is repackaged and reshipped.
7.
After the cabinet is unpacked, check the cabinet and the hardware kit to insure that all of the
components and hardware items have been received with the cabinet. If any components are
missing or damaged, email Technical Support at
, or call toll-‐free at
800-‐834-‐4969 (US & Canada) Monday to Friday, 5 a.m. to 5 p.m., Pacific Time.
ü
