17
“Add skip”, it can skip some PCB and not mounting this PCB.
“Create single” used to all the small PCB expand to one PCB, and save into a new work
file. This function means you can adjust one single component in this new PCB. New work
file will show “Single” at end for the name.
6.1.5. PCB calibrate
Due to each PCB is different, it has some offset, in order to ensure the accuracy, you
need to calibrate the actual position of the PCB and component. Image as below:
PIC6-12
Two ways of PCB calibrate:
Component coordinate:
the left-up corner com the right-down corner
component.
Mark point:
you can use 2 random points as Mark point, then enter its
theoretical coordinates, then positioning its actual position, machine can
calibrate automatically.
(Note: 2 mark points need to be far apart, such as one in
left-up corner and another in right-down corner.)
If you use mark point calibrate automatically, you need to edit a
model
for this 2 mark
points, model image as below:
