19
(3)
Comp. cnt:
component count.
(4)
PCB cnt:
PCB count.
(5)
Ave. speed:
average speed, cph.
(6)
Time cnt:
time count.
(7)
Tray start:
set the start number for IC tray
(8)
Up-looking camera:
press it will show the component by up-looking
camera
(9)
Working lamp
(10)
PCB calibrate
(11)
Vacuum detect:
if you turn off vacuum detect, machine will not detection of
pick failure;
(12)
Head to the farthest place:
press it the head will move to the farthest
place away from origin point (means the home position).
(13)
Step:
single step;
(14)
Run
(15)
Stop:
end working
