NOTE: To use both remote and manual functions the main on/off switch must be
in the
‘on’ position.
Operating by Manual Button
Power Button
Flame Button
Heater Button
Main Switch
NOTE
:
The flame will always be on when the appliance is on.
Main switch
The main switch supplies power to all of the functions of the fireplace. This switch must
be in the “ON” position for any of the functions including the remote to work. To access
this switch it will be necessary to remove the fret cover.
Power button
Press once turns appliance and flame effects on. Press again turns appliance and
flame effects & heating off.
Flame button
By pressing the FLAME button, the unit will cycle through four flame effects.
Heater button
Press once turns the Fan on, and 10 seconds later the Low heat on. (Pilot light
illuminated
●○
)
Press again turns on High heat. (Pilot lights illuminated
●●
)
Press third time turns heat off. 10 seconds later Fan off (Pilot lights illuminated
○○
)
There are 3 levels you can cycle through including the OFF setting.