Resetting the Thermal Cut-out Switch
The appliance is fitted with an Electronic Safety Control (E.S.). This is a safety device,
which switches off the fire if, for any reason, the appliance overheats, e.g. when
covered. If the heater stops operating whilst the flame effect continues normally, this
indicates that the E.S. Control is in operation. The E.S. Control can only be re-set after
the appliance has cooled down, in order to re-set the E.S. Control proceed as follows:
Switch off the appliance (Manual On/Off switch) and leave for approximately
10-15 minutes.
Remove any obstruction to the fan heater outlet or fan blades etc. Make sure
that the power supply is disconnected at the plug socket outlet whilst you do
this.
Switch on appliance and the E.S. Control will re-set.
Ensure that the appliance is functioning correctly. If the E.S. Control operates
again, the appliance should be checked by a competent Electrician.
Cleaning the Fireplace
You can clean the exterior of the fireplace with a soft, damp, lint-free cloth. Do not use
cleaning or polishing products. To remove fingerprints or other marks on the front glass
panel, use a soft, damp, lint-free cloth with a good quality household glass cleaner. The
front glass panel should always be completely dried with a clean, lint-free cloth or paper
towel.
Caution: Do not use abrasive cleaners on the glass panel. Do not spray
liquids directly onto any surface of the unit.
Warning: An authorised service representative should perform any
other servicing
.
Environment
Meaning of crossed
–out wheeled dustbin:
Do not dispose of electrical appliances as unsorted municipal waste,
use separate collection facilities. Contact your local government for
information regarding the collection systems available. If electrical
appliances are disposed of in landfills or dumps, hazardous
substances can leak into the groundwater and get into the food
chain, damaging your health and well-being. When replacing old
appliances with new ones, the retailer is legally obligated to take
back your old appliance for disposals at least free of charge.
This fire complies with the European Safety Standards (LVD) EN 60335-2-30
and the European Electro Magnetic Compatibility (EMC) EN 55014-1, EN
55014-2 and EN 61000-3-2 and EN 61000-3-3 which covers the essential
requirements of the EC Council Directives and 2004/108/EC.