2
ASSEMBLY
1. Ensure that all cords are unplugged. Remove magnetic breakaway cord from
back of control panel and outlet.
2. Wash all parts thoroughly with soap and warm water and allow to air dry.
3. Install INNER COOK POT into OUTER FRYER BODY.
4. Install HEATING ELEMENT with control dials into receiver. See image below.
NOTE:
Ensure it is fully seated in mounting base or unit will not work.
5. Install FRYER/STEAMING BASKET into inner COOK POT.
6. Place GLASS COVER on top of outer frying body with notched area over
notched area for HEATING ELEMENT.
7. Attach magnetic breakaway cord to back of CONTROL UNIT.
HOW TO CLEAN
• Individual components are not dishwasher safe.
• To remove oil: First - it is improtant to allow oil to cool. It is then recommended
that a syphon pump, designed for oil removal, be used to remove oil from inner
pot. As an alternative, a ladle may be used to bail the oil. Any remaining oil can
be removed from inner pot and placed in an approved container.
• Never wash the control panel with dials. Instead, wipe with a dry cloth or food-
safe degreaser. The stainless steel element can be cleaned with warm soap
and water and allowed to air dry.
• All other components can be washed.
• Confirm that all components are completely dry before using or placing
in storage.
• We recommend that the unit be thoroughly cleaned prior to every use.
• Store all components in inner cook pot in a dry location when not in use.
CAUTION
Allow unit to fully cool (room temperature) before performing any cleaning.
