Char-Broil 463240613, Product Manual

Page: 17 / 32

5
Back panel
6
On back of the stove top, attach back panel to cart side panels using four #8x3/8" self-tapping screws.
Connect the wire from burner electrode into the back of Electronic ignition module, positions 1. Connect the two wires [(a) and
(b)] from switch wiring harness into the back of Electronic ignition module.
NOTE: Switch terminals are larger than electrode terminal and should only be installed in location shown as (a),(b).
Release cap and nut from electronic ignition module. Attach Electronic ignition module to front brace with the nut. Insert AAA
battery into module, negati v e end first. Replace the cap.
Electronic ignition module
Back of electronic ignition module
Front brace
Cap
Nut
AAA battery
(+)
( - )
#8x3/8"self-tapping
screw
1
(a) (b)
17
(-)