463234703 • 7
12. To install the side shelf handle, remove the bolt and washer
from one side of the handle (cap remains with handle).
From beneath shelf, place washer onto bolt and insert bolt
through end of shelf bracket, side shelf, and into handle.
Leave bolt loose until other side of handle is attached, then
fully tighten both sides. Repeat for other side shelf.
Assemble the matchlight stick and chain on
the Right rear leg using 3/16"x1/2" self tapping
Phillip’s head screw. See
Fig. 3
.
To reduce the weight of the grill head, open the grill lid and
remove the packed components.
This step requires 2 people
to lift and position the grill head onto the cart.
15.
HINT:
Slide grill head into cart from the front
. Use care to
avoid scratching tops of side shelves.
Align the 2 holes
beneath the hang ledge on each side of the grill head with
the 2 holes in the side shelf and bowl support bracket on
the cart. Raise the grill lid and insert 4 of the
1/4x1/2"
Phillipshead screws. Beneath the side shelves, add
1/4" nuts
. Do not fully tighten. See
Fig. 5
.
Basket
FIGURE 4
Tool
hooks
13. Install basket to right side panel by
placing basket hooks into panel
vents and securing bottom of
basket to panel using 2 of the
3/16x3/8"
Phillipshead screws
and
3/16" lock nuts
. Fully
tighten. See
Fig. 4.
14.
Note: Some previously
assembled components not
shown for clarity.
Slide tool hooks onto towel
bar
.
Assemble the towel rod with
the hooks to the front of the right
shelf with two, 3/16" nuts
provided. See
Fig. 4.
FIGURE 3
Shelf
handle
Side
shelf
Shelf bracket,
flat side facing
outward
Lower
hole
Door
bracket
Door
Handle
Hinge
Hinge
hole
Align
holes
Door
stop
Remove
film
Side Burner
frame
Side Burner
Lid
Screw with
washer
FIGURE 5
Grill
head
Hang
ledge
Hang
ledges
rest on
shelves
Match light
stick & chain
