background image

10  • 463234703 

Connecting Your Grill to the 
Natural Gas Source

 

1. Coat pipe nipple with gas resistant dope. Screw socket onto gas 

manifold at gas source (A). 

2. Connect unattached end of natural gas hose to socket. Push sleeve 

back on socket (B) and insert plug until sleeve snaps forward, locking 
plug into socket. 

When socket and plug are connected, valve in socket opens automati­ 
cally to permit full gas flow. When coupling is disconnected, valve in 
socket instantly and positively shuts off flow of gas. Because valve in 
socket positively shuts off flow of gas, grill can be disconnected from gas 
source by disconnecting hose from socket. Socket can be left on 
manifold of gas source if so desired.

 

With proper assembly, plug cannot be removed without 
pushing sleeve back.

To disconnect, push sleeve back and pull plug 

out of sleeve (this automatically shuts off gas).

 

Please Note: Hose and assembly are A.G.A. certified and C.G.A. 
listed for natural gas, manufactured gas, mixed gas and for 
liquefied petroleum and for LP Gas­Air mixtures on basis of 0.64 
specific gravity for 1000 BTU's per cubic foot of gas at 0.3 in. 
water column pressure drop. Only ANSI Z21.54 approved hoses 
should be used with this grill. 

The appliance and its individual shut off valve must be discon­ 
nected from the gas supply piping system during any pressure 
testing of that system at test pressures in excess of 
1/2 psig (3.5kPa). 

The appliance must be isolated from the gas supply piping 
system by closing its individual manual shutoff valve during 
any pressure testing of the gas supply piping system at test 
pressures equal to or less than 1/2 psi (3.5 kPa). 

Use  and  Care

 

Gas 

Flow 

Pipe Nipple 

Gas Manifold 

Socket 

Sleeve 

Insert cover in socket 

when hose is removed 

Plug 

Hose 

Socket 

Push sleeve back to attach 

Hose 

Plug 

WARNING 

WARNING 

WARNING 

WARNING 

WARNING

 

• Connection  to gas source  must  be done by a 

certified  plumber. 

IMPORTANT: 

IMPORTANT: 

IMPORTANT: 

IMPORTANT: 

IMPORTANT:

  Regulator  supplied  with  grill  MUST  be 

utilized  for  natural  gas  connection. 

WARNING 

WARNING 

WARNING 

WARNING 

WARNING

 

• Do not use hard metal piping of any kind to 

connect this type  of  grill to  natural  gas  source.  Use 

ONLY  hose  specified  by  Char­Broil.  Using  hard 

metal  piping  or  convoluted  metal  tubing  is  an 

unsafe  practice.  Movement  of  the  grill  can  cause 

breakage  of  metal  pipe.

Summary of Contents for 463234703

















Reviews: