18
3
4
Control Panel
Attach control panel / HVR assembly to firebox with two
#10-24x1/2’’ machine screws
,
5x15 fiber washers
and
#10-24
flange nut.
Burner
Place burner assembly into firebox. Make sure burner tubes are correctly engaged with valves. Fasten the burner
assembly to the firebox using
5x15 fiber washers
and
#10-24x1/2’’ machine screws
. Insert
#10-24x1-1/4’’ machine
screws
from outside the firebox, then fasten with
#10-24 flange nuts
and
5x15 fiber washers
from the inside (A).
Insert one end of burner clip into hole in venturi tube and hook other end around valve manifold. Attach ignitor wire to
ignitor (B).
5x15
Fiber Washer
Qty.2
#10-24x1/2’’
Machine Screw
Qty.2
#10-24
Flange Nut
Qty.2
HVR Assembly
5x15
Fiber Washer
Qty.6
#10-24
Flange Nut
Qty.4
#10-24x1/2’’
Machine Screw
Qty.2
#10-24x1-1/4’’
Machine Screw
Qty.4
Venturi Clip
Qty.2
B
A
Burner assembly
Ignitor
Valve
Venturi
Tube
Venturi Clip
Ignitor Wire
