1 | P a g e
1.
Safety Instructions & Precautions
Do not operate the HD modulator in high-humidity areas or expose it to water or moisture. Objects filled with
liquid should be placed on the device.
Disconnect the product from the wall outlet prior to cleaning. Use a light, damp cloth (no solvents) to dust or
clean the product.
Do not block or cover slots and openings in the HD modulator. These are provided for ventilation and protection
from overheating. Never place the HD modulator near or over a radiator or heat register. Do not place the HD
modulator in an enclosure such as a cabinet without proper ventilation.
We strongly recommend using the enclosed ground wire connecting to the ground cable of your house/building
to avoid voltage spikes or ground fault.
Never insert objects of any kind into the HD modulator through openings, as the objects may touch dangerous
voltage points or short out parts. This also could cause fire or electrical shock.
When replacement parts are required, ensure that the service technician uses replacement parts specified by
the manufacturer. Unauthorized substitutions may damage the HD modulator or cause electrical shock or fire
and will void the warranty.
Upon completion of any service or repair to the HD modulator, ask the service technician to perform safety
checks to ensure that the HD modulator is in proper operating condition.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
!
CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK,
DO NOT REMOVE COVER FROM THIS UNIT.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING: TO PREVENT SHOCK HAZARD,
DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
