17 | P a g e
6.
Audio Lag behind video when using output from Receiver
SOL. Increase Mbps to 19000
SOL. Pixel clock with the specific tv is lagging behind other tv’s in the system. Different tuners respond
differently. This clock adjustment will keep them in sync. Samsung is the number 1 offender causing sync and
video breakup problems. Adjust to setting 74800 and VBR 5000. This may be time consuming and take more
time depending on the model.
SOL. Modulate HDMI; use Tos-Link Digital Output from TV output to the audio amplifier in the system
SOL. Output from Receiver should also be Digital tos-link output. Avoid using the audio RCA output.
BEST Practices:
Outdoor Antenna Grounding - If you connect an outside antenna or cable system to the product, be sure the
antenna or cable system is grounded to provide protection against voltage surges and built-up static charges.
Refer to Section 810 of the National Electrical Code, ANSI/NFPA No. 70, for proper grounding of the mast and
supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors,
location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding
electrode
7.
Basic Input and RF Settings
Video Input
Sets the video resolution for the HDMI input resolution automatically.
You may want to change the cable box/satellite receiver and TV to match 1080p or 1080i.
Video Format
Sets the video resolution for the HDMI input automatically. Each time either the channel source
or broadcast changes, the HDM100/200 will adjust to match that resolution.
Set all sources to 1080P or 1080i
*Channel number
The channel number you set the modulator on will correspond with the analog channel. Although this is a
digital modulator sending a digital channel on the analog channel carrier.
Set open unused analog channel number
*Set Major channel i.e.: 2
*Set Minor channel i.e.: 21
Attenuation dB
decreases the power of the RF output, in dBmV
0 – 30 dBmV
*QAM
Many displays are set to tune 256 QAM although universally displays tune in channels set to 64 QAM.
