2 | P a g e
1.
RF OUT
：
75 ohm F type connector for RF output
2.
RJ 45
：
LAN port for remote configuration and system management setup
3.
HDMI
：
Digital A/V input
4.
Joint screw for ground wire (included)
5.
DC 12V: 12VDC 1000mA power supply input
2-4. Functions of Operating Button:
Locked to prevent unintended changes to the programming.
INSTALLER CODE: Push and hold ENTER and RIGHT ARROW buttons at the same time for 5 seconds.
see following instructions of buttons on the front panel to operate in each setting category.
“Enter”
:
Enter a category to configure settings
Confirm selected item or numbers. (Please press ENTER after each setting to make it effective; the setting will be
marked a “ * ”)
“Up” / “Down”
:
Edit numbers
Select different options in a category
“Left” / “Right”
:
Left button also works as “EXIT”
Select different options in a category
Move to digit places to set numbers
