12
ASSEMBLY INSTRUCTIONS
Do not store a spare LP-gas cylinder under or near this appliance;
Never fill the cylinder beyond 80 percent full;
Place the dust cap on the cylinder valve outlet whenever the cylinder is not
in use. Only install the type of dust cap on the cylinder valve that is provided with
the cylinder valve. Other type of caps or plugs may result in leakage of propane.
ATTENTION
: THIS PRODUCT IS NOT FOR COMMERCIAL USE INTENDED
FOR RESIDENTIAL USE ONLY.
Do not sit or stand on this table .
Keep children away during assembly, This item contains small parts which can be
swallowed by children.
Do not use indoors and inside any enclosure.
Retain the assembly instruction for future reference.
Installer – Please leave these instruction with the owner.
Please quote following FQC NO. when contacting service center.
The cylinder used must include a collar to protect the
cylinder valve.
Never connect an unregulated propane cylinder to the
heater. Attach regulator to cylinder. Complete attachment.
Fasten cylinder with butterfly bolt, install cylinder.
The appliance must be isolated from the gas supply
piping system by closing its individual manual shutoff
valve during any pressure testing of the gas supply
piping system at test pressures equal to or less than
1/2psi (3.5kPa).
Other cylinders may be acceptable for use with the
appliance provided they are compatible with the appliance
retention means.
The knob on the LP tank must be closed. Make sure that
the knob is turned clockwise to a full stop. The
cylinder supply system must be arranged for vapor
withdrawal. Check that the control knob on the control
unit is turned off. Hold the regulator in one hand and
insert the nipple into the valve outlet. Be sure the nipple
is centered in the valve outlet. The coupling nut connects
to the large outside threads on the valve outlet.
Hand-tighten the coupling nut clockwise until it comes
to a full stop. Firmly tighten by hand only.
To Disconnect:
Fully close the tank valve by turning
clockwise. Turn the coupling nut counterclockwise
until the regulator assembly detaches.
Summary of Contents for FPC-C-02
Page 3: ...3 LP GAS CYLINDER LABEL...
