background image

19

ONE-YEAR LIMITED WARRANTY

This product is inspected, tested and carefully packaged to minimize the chance of damage during 
shipment. If a part within one year from the date of purchase proves to be defective in material or 
fabrication under normal use, the part will be repaired or replaced. The Company's obligation under 
the warranty is to replace or repair defective parts at our discretion. Any expenses or damage resulting 
from the installation, removal or transportation of the product will the responsibility of the owner and 
are not covered by this warranty. The owner assumes all other risks arising out from the use or misuse 
of the product. The warranty will be void if the product damage or failure is deemed by the Company 
to be caused by accident, alteration, misuse, abuse, incorrect installation or removal, or connection to 
an incorrect power source by the owner. The Company neither assumes, nor authorizes any person 
or entity to assume for it any obligation or liability associated with its products. 

Heater’s warranty extends for 1 years from date of
purchase by original purchaser.
Manufactured by: Jiangsu Gardensun Furnace Co., Ltd.
Xinwu Village Zouqu Town Changzhou City
Jiangsu Province P.R. China
Manufacturer will cover:
All parts found to be defective due to materials or
workmanship for 1 years from the date of original
purchase. Proof of purchase is required before warranty
performance will be rendered. Sales receipt and
validation of product registration are valid forms of proof
of purchase.

Warranty Exclusion

Manufacturer will NOT cover:
Assembly or start-up
Normal adjustment to burner
Cleaning and/or general maintenance
Customer who take apart there heater without contacting
the service center and try to fix the internal heating and
gas part will void warranty.

Legal Rights

No one else is authorized to make any warranties on behalf
of manufacturer.
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY,
EXPRESS OR IMPLIED, ORAL OR WRITTEN,
INCLUDING, BUT NOT LIMITED TO, ANY WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE.

Manufactured by:
Jiangsu Gardensun Furnace Co., Ltd.
Xinwu Village Zouqu Town Changzhou City
Jiangsu Province P.R. China
Tel: 86-519-83317471
Fax: 86-519-83315116
Http: www.jiadeshun.com
Email

˖

[email protected]

For additional assistance or service, please call: 1-855-885-5858.

Summary of Contents for FPC-C-02





















Reviews: