Chandler AMETEK 5617, Instruction Manual

Page: 11 / 42

1-2 SECTION 1
–
INSTALLATION
System Set-up
Remote Panel Connection
1.
The remote panel assembly is connected to the instrument by connecting the
thermocouple cable from the remote panel assembly to the labeled receptacle on the back
of the instrument. The signal cable is also connected to a labeled receptacle at the back
of the instrument.
2. If the system is equipped with the Chandler Engineering 5270 Data Acquisition and
Control System (DACS) software, the RS232 cable is connected to a serial port on the
computer.
3. Turn ON all equipment.
56-0302
Signal Cable
56-0303
Thermocouple Cable
RS232 Cable
MODEL 5617