Chandler AMETEK 5617, Instruction Manual

Page: 13 / 42

2-2 SECTION 2
–
OPERATING INSTRUCTIONS
Remote Control Panel
This instrument is furnished with a remote control panel, which permits operation of the
instrument from a remote location. The remote panel assembly and the instrument may be
separated up to 50 feet.
From the remote panel, the operator may control the following items:
•
Control temperature using the programmable temperature controller.
•
Read the pressure on the digital display.
•
Control the pressure using the PUMP and PRESSURE RELEASE switches.
•
Turn the heater “ON” or “OFF” using the HEATER SWITCH.
•
Turn the cooling water to the cylinder jackets “ON” or “OFF” using the COOLING
WATER SWITCH.
•
When the option exists, the remote control assembly is connected to the computer
running the 5270 DACS software. The values displayed on the temperature controller
and pressure display are graphed and stored in the test data file.
Note: The cylinder pressure can be automatically controlled by setting the high and
low contacts of the pressure control gauge on the instrument panel to the
desired pressure range. (Position switch #4 or #6 to
“ON” to activate the
LOW or HIGH pressure limit.) Pressure may still be controlled with the
remote switches.