Champion Eseries Installation/Operation With Service Replacement Parts Download Page 9

Page: 9 / 228

Operating Instructions

Operation

Make sure the dishwasher was properly installed and tested prior to operation.

Read the operating instructions completely before you operate your dishwasher for

the first time.

Keep these instructions available for quick reference.

Contact your supervisor immediately if you have questions about the dishwasher.

Contact your local authorized Champion service agency for technical support.

Our National Service Department provides 24 hour support 365 days a year with a
Toll-free number in the United States.

USA National Service

M-F • 8 AM - 5PM EST

Toll-free: 1 (800) 858-44772

In the USA, a factory technician will return your call after-hours and during holidays.

Canadian National Service

M-F • 8:30 AM - 4:30PM EST

Toll-free: 1 (800) 263-5798

IMPORTANT

Please read the steps below before you operate your dishwasher.

Summary of Contents for Eseries





































































































































































































































Search results

Summary of Contents for Eseries

Reviews:

Related manuals for Eseries

Brands by name

Popular brands

Champion Eseries, Installation/Operation With Service Replacement Parts

Search results

Summary of Contents for Eseries

Reviews:

Related manuals for Eseries

Brands by name

Popular brands