Champion Eseries Installation/Operation With Service Replacement Parts Download Page 37

Page: 37 / 228

29. Make sure the sections are

adjusted to the same height.

30. Check the alignment of the

conveyor tracks inside the

machine and adjust tracks if

necessary. Tracks should align

if the sections are level.

31. Bolt all the HOOD sections

together with twenty (20), 5/16-

18 X 3/4" bolts, lockwashers and

nuts included in the hardware kit.

32. Tighten the hood bolts in a

cross-pattern to pull the sections

together.

33. Silicon sealant should squeeze

out of the section joints.

34. Apply a 1/2" bead of Foodgrade

sealant in the bottom of the clip.

35. Invert the clip and slide it over

the section joint

36. Bolt the clip securely in place.

Section Assembly

Installation Instructions

Section Assembly

Summary of Contents for Eseries





































































































































































































































Search results

Summary of Contents for Eseries

Reviews:

Related manuals for Eseries

Brands by name

Popular brands

Champion Eseries, Installation/Operation With Service Replacement Parts

Search results

Summary of Contents for Eseries

Reviews:

Related manuals for Eseries

Brands by name

Popular brands