Champion Eseries Installation/Operation With Service Replacement Parts Download Page 24

Page: 24 / 228

Daily Maintenance

Keep your dishwasher and the surrounding area clean.

After each meal period or every 2 hours of operation, whichever occurs first

and at the end of the day.

Turn POWER OFF

Drain the dishwasher

Remove and clean the curtains

Flush the inside of the machine from top to bottom and all hidden places

Remove and clean scrap screens and baskets flushing with fresh water

Clean drain screens and pump screens

Wipe the exterior of the dishwasher with a soft cloth DO NOT HOSE WITH WATER

Leave doors open so the dishwasher may better dry overnight

Immediately report loose, broken or missing parts to your supervisor.

Check drains for flow restrictions.

Check the dishwasher for leaks.

Operate the dishwasher as explained in this manual.

Monthly Maintenance

Inspect pump hoses, door linkage, springs, and exterior of dishwasher for wear.

Inspect the wash arm bearings and O-rings.

Check the condition of scrap screens and dishracks for damage.

Check the toggle switches and indicator lights for damage.

Check the wash pump motor for loud bearings and leaking pump seal.

Annual Maintenance

Call your authorized service agent or local service representative and schedule

a complete inspection of your dishwasher by our trained professionals.

Schedule

your annual maintenance when you can give the service

agent unrestricted access to the dishwasher for at least 2 to 3 hours.

Operating Instructions

Operation

Summary of Contents for Eseries





































































































































































































































Search results

Summary of Contents for Eseries

Reviews:

Related manuals for Eseries

Brands by name

Popular brands

Champion Eseries, Installation/Operation With Service Replacement Parts

Search results

Summary of Contents for Eseries

Reviews:

Related manuals for Eseries

Brands by name

Popular brands