Champion Eseries Installation/Operation With Service Replacement Parts Download Page 20

Page: 20 / 228

Operating Instructions

Operation

24.

Flip the dishwasher
power switch up.

25.

The dishwasher

automatically fills

with water.

26.

The tank heat comes

on as soon as the tanks are full.

27.

Wait for 15-20 minutes to allow the wash and
rinse tanks to reach operating temperature.

The prewash tank is not heated so its temperature
may be lower than the wash tank. This is okay.

The final rinse temperature is checked when the dishwasher

conveyor belt and wash pumps are running during normal operation.

R-L shown

Summary of Contents for Eseries





































































































































































































































Search results

Summary of Contents for Eseries

Reviews:

Related manuals for Eseries

Brands by name

Popular brands

Champion Eseries, Installation/Operation With Service Replacement Parts

Search results

Summary of Contents for Eseries

Reviews:

Related manuals for Eseries

Brands by name

Popular brands