![background image](http://html.mh-extra.com/html/champion/d5/d5_installation-and-service-data_2588307002.webp)
D5-MANS
Mar ’19
- 2 -
Quick Start
Mechanical Installation
(Refer to Page 6)
Lubrication
Rotation
(Refer to Page 8)
(Refer to Page 10)
18”
[458mm]
18”
[458mm]
The Unit must be located indoors, in a dry, clean, cool,
dust free, and well ventilated area.
Allow a minimum 18” (458mm) around and 36” (915mm)
above Unit.
The ambient temperature should be between 10°C and
40°C (50°F and 104°F).
Ensure that the floor under the Unit is smooth, level and
capable of bearing the weight of the Compressor.
If installed in a compressor room, ensure that the room is
adequately ventilated.
The unit must be anchored to the floor using isolator pads.
Ensure the oil level in the Air End is between the
top (maximum) or bottom (minimum) thread as
shown.
The correct rotation is as shown.
The Unit is equipped with an Anti-Rotation
Switch. Check that the rotation is correct.
Drain condensate (water) from oil tank.
If compressor work-cycle experiences long
pauses, condensate will gather in oil tank.
Drain condensate EVERY 50HRS OR WEEKLY
.
(Refer to Page 8 for details)
36”
[915mm]
Installation Kit
IK515
Flex-Hose &
Vibration Isolators
(sold separately)
18”
[458mm]
Unit
Nameplate
Model No.
Serial No.
Unit voltage
Summary of Contents for D5
Page 36: ......