Champion D5, Installation And Service Data

Page: 13 / 40

D5-MANS
Mar ’19
- 13 -
Preventative Maintenance Schedule
Noted on the following pages are general Maintenance guidelines based on average working conditions. Should
the Unit be worked under extreme conditions, please contact your Champion Distributor for further input. As well,
all maintenance/service work must be carried out by a qualified Technician.
The typical operating temperature of the Unit, this dependant on ambient temperatures, is between 70ºC and
85ºC (158ºF and 185ºF).
If the operating temperature of the Unit is too low (less than 70°C (158°F)):
 condensation will build up in the system and mix with the oil, causing internal component problems in the
Unit
 Change the ambient conditions to increase the operating temperature.
If the operating temperature of the Unit is too high (above 85°C (185°F)):
 the oil will oxidize and lose it’s properties, this causing internal damage to components as well
 to combat this, the oil must be changed more often than noted below.
When servicing the Air Compressor, shut off all
power to the Unit, and drain it of air pressure.
It is the responsibility of the compressor owner
to ensure that a regular Maintenance Schedule
is followed.
Note: Participation in Champion’s oil analysis sampling program is required to receive the
extended warranty. Any recommendations detailed in the oil analysis report must be
followed as outlined in the report.
Regular Maintenance Items
‘MK-D5-CH’ 4000 Hour Maintenance Kit
(2) DSC-603-CH Oil filter
(1) DSC-002832-CH Air/Oil Separator Filter
(2) DSC-001569 Air Filter
(1)
308KBA6003
Oil Sample Kit
Lubricant Options
Champion offers various lubricants for your unit,
available in quantities of 5 US Gal. (18.9 litre) pails:
RotorLub 8000
RotorLub 8000TH
RotorLub 4000
RotorLub 4000FG
RotorLub 4000FG-68
Internal Access for Maintenance
The internal components of the Unit are accessible for
servicing by way of removing the RH Side Panel.
The Back Panel is also removable to access the Belts.
Remove the plastic cap to change air/oil separator filter.