![background image](http://html1.mh-extra.com/html/champion/100250/100250_operators-manual_2588759025.webp)
25
100250 - 37 TON FULL BEAM LOg SPLiTTER
MAiNTENANCE
NOTiCE
The drain plug is sealed with Teflon tape. Add 2-3 wraps of
new Teflon tape as needed when replacing the drain plug to
prevent oil leak
B
C
A
9. Unscrew and remove the tank fill plug, on top of the tank.
Using a funnel add approximately 5 gal. (18.9 L) of hydraulic
oil to the tank. Wipe up any spilled oil. (B)
10. Turn the fuel valve on, and start the engine. Purge the air
from the system by extending and retracting the wedge
several times until the motion is smooth.
11. Check the hydraulic oil level using the sight glass.
Add 1.8 gal. (6.8 L) of hydraulic oil, so the oil level is visible in
the sight glass. (C)
12. Dispose of used oil at approved recycling locations.
WARNiNg
Always shut off the engine, disconnect the spark plug, and
relieve system pressure before cleaning, adjusting, or repairing
the splitter. Relieve system pressure by moving split control
lever back and forth several times.
NOTiCE
Change the hydraulic oil filter after the first 50 hours of use.
Then every 100 hours or seasonally.
NOTiCE
Refer to Specifications for a list of compatible replacement
filters or call Champion Power Equipment at 1-877-338-0999
to order a replacement OEM filter.
Maintenance Schedule
Follow the service intervals indicated in the following maintenance
schedule.
Service your log splitter more frequently when operating in
adverse conditions.
Contact our Technical Support Team at 1-877-338-0999 to locate
the nearest CPE certified service dealer for your log splitter or
engine maintenance needs.
EVERY 8 hOURS OR DaILY
Check engine and hydraulic oil levels
Clean around air intake and muffler
FIRST 5 hOURS
Change oil
EVERY 50 hOURS OR EVERY SEaSON
Clean air filter
Change oil if operating under heavy load or in hot
environments
EVERY 100 hOURS OR EVERY SEaSON
Change oil
Clean/adjust spark plug
Check/adjust valve clearance*
Clean spark arrestor
Clean fuel tank and filter*
Change hydraulic oil
Change hydraulic oil filter
EVERY 250 hOURS
Clean combustion chamber*
EVERY YEaR
Inspect wheel bearings and repack bearing grease as
needed.
EVERY 3 YEaRS
Replace fuel line*
* To be performed by knowledgeable, experienced owners or CPE certified service
centers.