6
6. Attach the clevis hook and hand strap. (See Fig. 6, Fig. 7)
7. Connect the battery leads. NOTICE: BATTERY SHOULD BE A MINIMUM OF
650CCA FOR WINCH TO FUNCTION PROPERLY. Connect the red (positive)
lead from the solenoid to the positive (+) terminal of the vehicles 12 volt
battery. Connect the black (negative) lead from the motor to the Negative (-)
terminal of the battery.
Caution
Battery cables should not be drawn taut. Leave some slack
for cable movement.
8. Attach the hand held remote lead to the winch and test for proper operation.
(See Fig. 9)
9. Check for proper drum rotation. Pull and turn the clutch knob to the “out”
position (Free spooling). Pull out some cable from the drum, and then turn
the clutch knob to the “In” position to engage the gears. Press the cable out
button on the power switch. If the drum is turning and releasing more cable
then your connections are accurate. If the drum is turning and collecting
more cable then reverse the leads on the motor. Repeat and check rotation.
Fig. 1 Fig. 2
Summary of Contents for C80195
Page 1: ......
Page 8: ...7 Fig 3 Fig 4 Fig 5 Fig 6 Fig 7 Fig 8 Fig 9...
