26
Horizontal and
v
ertical
reinforcement is needed for
light
w
eight garage doors
(fi
b
erglass, al
u
min
u
m, steel,
door
w
ith glass panel, etc.)
(not pro
v
ided).
Header
W
all
V
ertical
Centerline of
Garage Door
Finished Ceilin
g
Optional
Placement
of Door
Bracket
Header
Bracket
Door
Bracket
3
8
mm S
u
pport
For a door
w
ith no exposed framing,
or for the optional installation,
u
se
5/16"x1-1/2" lag scre
w
s (not pro
v
ided)
to fasten door
b
racket.
Door
Bracket
Top of Door
(Inside Garage)
Carriage Bolt
5/16"-1
8
x2-1/2"
Optional
Placement
Lock
W
asher
5/16"
Nu
t
5/16"-1
8
Top Edge
of Door
ONE-PIECE DOORS
Please read and comply with the warnings and
reinforcement instructions on the previous page.
They apply to one-piece doors also.
• Center the door bracket on the top of the door, in
line with the header bracket as shown. Mark either
the left and right, or the top and bottom holes.
• Drill 8 mm pilot holes and fasten the bracket with
hardware provided.
If the door has no exposed framing, drill 5 mm pilot
holes and fasten the bracket with 5/16"x1-1/2" lag
screws (not provided) to the top of the door.
NOTE:
The door bracket may be installed on the top
edge of the door if required for your installation.
(Refer to the dotted line optional placement drawing.)
Drill 5 mm pilot holes and substitute 5/16"x1-1/2" lag
screws (not provided) to fasten the bracket to the
door.
Carriage Bolt
5/16"-18x2-1/2"
Nut 5/16"-18
Lock Washer 5/16"
HARDWARE SHOWN ACTUAL SIZE
13 mm Socket Wrench
