237,7
221,8
3
3
,1
3
9
,1
3
9
,7
24
64,4
First completely close the shutter. Remove the fas-
tening screws of the facing on the wall using a
screw driver (fig.1) and store screws for later
reuse. Pull the mechanical strap coiler out of the
wall (Attention: the spring from the mechanical
strap coiler may shoot back uncontrollably!). Block
the spring casing with a metal flap. Extract the
strap and cut it approx. 30cm beneath the opening
in the wall (fig.2).
1
2
Now take the shutter strap motor and remove the screw cover on the front (fig.3). Remove the two
unlosable screws and take the control panel off the flush mount coiler (fig.4). Loosen the fastening
screw of the strap spool holder using a screw driver (fig.5). Slowly remove the strap spool and remove
the sleeve from the centre of the spool.
3
4
5
Max. shutter size (shutter size = length x width):
Plastic-Mini- Profiles approx. 6m²
Aluminium-Mini-Profiles approx. 4.5m²
Plastic-Maxi-Profiles approx. 4.5m²
Aluminium-Maxi-Profiles approx. 2.6m²
709156-1GB
G
B
-3
