1. Instruction manual (this document)
2. Stop collar
3. Clamp bracket, plates, washers (2) and nuts (2)
4. TX4EVS Premium transmitter (2)
5. 128EV wireless wall button (1)
6. Opener
7. Self tapping screws (2) (for pinning the door)
8. Rivets (4)
9. Warning label and risk of entrapment label
10. Extension poles (2)
CARTON INVENTORY
1
13 mm, 10 mm, 8 mm
5.5 mm
Marke
r Pen
8
TOOLS REQUIRED
2
1. Ladder
2. Adjustable wrench for U-bolts already installed
on the door
3. 8 mm socket, 10 mm socket and 13 mm extended
socket and socket wrench
4. 300 mm socket extension (for minimum side-room
installations)
5. Drill and 5.5 mm drill bit
6. Philips-head screwdriver
7. Marker pen
8. Rope
9. Door stand (not shown)
DOOR REQUIREMENTS
3
Ensure that there is at least 45 mm from the edge of the curtain to the edge of the bracket. If the roller door
drum wheel is on the edge of the curtain or is a smaller diameter, additional clearance may be required.
Assemble the opener to the door axle and the existing door bracket using the U clamp assembly provided.
Tighten to 25-28 Nm. Full installation process is in section 13.
Intended use:
The garage door operator is intended exclusively for the impulse operation of spring-compensated
residential/non-commercial sector single skin rolling Garage door.
Note the manufacturers specifications regarding the door and operator combination.
The door must meet mechanical requirements according EN 12604.
95 mm
Minimum distance from
edge of curtain to edge of
door bracket 45 mm
The LM750EVGB is suitable for spring balanced
Residential single skin rolling garage doors with:
• Maximum door height of 4.5 m
• Maximum curtain area of 18 m
2
• Maximum door mass of 120 kg
Door axle diameter must not exceed 35 mm.
2
