14
white
black
24 vdc
com
External
Receiver
Wired Wall Button
com
n/o
1
2
3
4
5
Obstruction Detection Beams
green (1) grey (2) white (3,4)
red (5)
TYPICAL WIRING DIAGRAM LM750EVGB Information for Service Personnel
23
STANDBY MODE (OPTIONAL)
22
The LM750EVGB has been factory set for low
standby mode (sub 1 watt usage).
This will deliver the lowest possible standby power. The
External Accessory Power is turned OFF in this mode,
so if this output is required, Normal Standby mode will
need to be activated (eg. for using an external receiver).
To Activate NORMAL STANDBY mode:
• Turn the mains power OFF.
• Press and Hold both “UP” and “DN” buttons.
• Turn ON mains power while both buttons are
still pressed.
• Courtesy light comes ON, and after 5
seconds another 10 flashes. Release both
buttons.
To Activate LOW STANDBY mode:
• Turn the mains power OFF.
• Press and Hold both “UP” and “DN” buttons.
• Turn ON mains power while both buttons are
still pressed.
• Courtesy light comes ON, and after 5
seconds another 1 flash. Release both
buttons.
Flash x 10
NORMAL
STANDBY
LOW
STANDBY
BEEP
DN
DN
UP
UP
P
P
S
S
1
1
2
2
3
3
Flash x 1
BEEP
DN
DN
UP
UP
P
P
S
S
1
1
2
2
3
3
