13
WIRELESS KEYPAD 747EV
To set the keyless entry PIN:
1.Locate the “S” button on the garage door opener.
2.Press and release the “S” button. 1 x Beep and LED
2 x flash.
3.Enter a 4-digit personal identification number (PIN)
of your choice on the keypad.
4.Press and hold the ENTER button. Check to see if
the courtesy light blinks. Release the ENTER button
after the light bulb blinks.
To change an existing keyless entry PIN:
1.Enter the existing programmed PIN that you want to
change.
2.Press and hold the # button until the light bulb
blinks twice.
3.Enter the new 4-digit PIN of your choice, then press
the ENTER button. The light bulb will blink once.
4.To test, enter the new PIN, then press the ENTER
button. The garage door opener will activate.
2
3
4
3
Press and release
the “S” button
Enter a 4-digit
PIN of your
choice
? ? ? ?
_ _ _ _
Press and hold
the enter button
Opener light bulbs
blink
After the lights
blink release the
ENTER button
1
Locate the “S”
button
Flash x 2
BEEP
DN
DN
UP
UP
P
P
S
S
1
1
2
2
3
3
DN
DN
UP
UP
P
P
S
S
1
1
2
2
3
3
PROGRAM INTERNET GATEWAY myQ
828EV
Using the S button on the garage door opener
1.Connect the ethernet cable to the Liftmaster
Internet Gateway and the router
2.Connect power to the Liftmater Internet Gateway.
3.Create an online account on the latest Liftmaster
MyQ smartphone application or on the
www.liftmaster.eu. It is recommended to use the
smartphone as it will allow you to stand close to the
garage door opener while programming.
4.Register the Liftmaster Internet Gateway.
5.Cloick on the “Add new device” and follow the steps
given by the application or on the web page.
2.The App will tell you if the programming was
successful and will prompt you to assign a name to
the garage door opener.
NOTE: to use your Smartphone to close the garage
door you also need to connect the safety photo cells,
770E or 771EVK.
DN
DN
UP
UP
P
P
S
S
1
1
2
2
3
3
Mobile
Computer
Apple
@
iPhone
@
,
iPad
@
, or
iPod Touch
@
BlackBerry
®
smartphones
Router
Ethernet
Kabel
Grüne
LED
LiftMaster
Internet
Gateway
Netzteil
Activate the opener only when door is in
full view, free of obstruction and properly
adjusted. No one should enter or leave
the garage while the door is in motion.
Do not allow children to operate push buttons or
remotes. Do not allow children to play near the
door.
WIRELESS PROGRAMMING (REMOTE ACCESSORIES) CONTINUED
