Doc 01-18540
Page 3 of 4
Step
Current
Setting
Purpose
Required
Digits
Acceptable Input
23
Alert 7, Service Cycle Alert
1
Same as step 23
23
Alert 8, Fire Open Alert
1
Same as step 23
23
Alert 9, Radio Input Stuck Alert
1
Same as step 23
24
Alert Pager Phone Number
Up to 16
Maximum of 16 digits, 00 erases digits
25
Alert Pager Pause
2
10 - 60, in seconds
26
Alert Pager Extension Number
Up to 16
Maximum of 16 digits, 00 erases digits
27
Alert Pager Extension Pause
Up to 2
0 - 60, in seconds
28
Alert Unit ID Number
Up to 16
Maximum of 16 digits, 00 erases digits
29
Alert Call Terminator
1
0 - 2, 0 = None, 1 = #, 2 =
✱
(asterisk)
30
Alert Test
1
1 - 9, refers to step 23 Alerts 1-9
31
Alert Attempts
Up to 3
0 - 100 (0 = no attempt)
32
Service Call Feature
Up to 5
0 to 65000, (0 disables Service Call)
33
Service Call Cycle Counter
Must enter
00
00 (clears Service Call Cycle Counter)
34
Holiday Schedule
5
nMMDD, n = Holiday number - 0 - 9
0 = first holiday, 9 = tenth holiday
MM = Two digits for month
DD = Two digits for date
35
Schedule Enable
1
0 -1, (0 = Disable, 1 = Enable)
36
Gate Schedule
NOTE:
HHMM = opening time
hhmm = closing time
11 digits
dsHHMMhhmmo,
d = One digit - week day.
(1 = Sun., 7 = Sat., 8 = Holiday)
s = One digit for segment(s), (1 or 2)
HH = Two digits for hour. (24 hr. format)
MM = Two digits for minutes
hh = Two digits for hour. (24 hr. format)
mm = Two digits for minutes
o = Holiday option (0 - 2
0 = Ignore if date falls on holiday
1 = Use if date falls on holiday
2 = Use day 8 if date falls on holiday
39
Reset Unit
Must enter
101010
101010, (resets unit)
40
Alert Modem Phone Number
Up to 16
Maximum of 16 digits, 00 erases digits
41
Alert Call Schedule
NOTE:
HHMM = start call time
hhmm = end call time
11 digits
dsHHMMhhmmo,
d = One digit – week day.
(1 = Sun., 7 = Sat., 8 = Holiday)
s = One digit for segment(s), (1 or 2)
HH = Two digits for hour. (24 hr. format)
MM = Two digits for minutes
hh = Two digits for hour. (24 hr. format)
mm = Two digits for minutes
o = Holiday option (0 – 2
0 = Ignore if date falls on holiday
1 = Use if date falls on holiday
2 = Use day 8 if date falls on holiday
LIMITED WARRANTY
LiftMaster warranties the X1 board’s CPU against original manufacturing defects for a period of one (1) year, measured from the
day of initial shipment by LiftMaster.
This warranty is conditioned upon LiftMaster being paid in full for all equipment; this warranty
is not effective until such payment in full has been received. The warranty period shown above applies only to the X1 board’s
CPU. Since this is a manufacturer's warranty, not a dealer's warranty, installation, removal, and freight charges are not part of this
warranty, nor shall the installer be held liable in any way for removal, repair or installation of the components unless otherwise
stated in a separate dealer's warranty. This warranty does not extend to systems or compartments that show evidence of damage
caused by vandalism, acts of God (e.g., lightning, flood), abuse, or unauthorized or improper service.
