Chamberlain Estate Series X1 LiftMaster Professional, Replacement Instructions

Page: 2 / 4

Doc 01-18540
Page 2 of 4
PROGRAMMING REFERENCE TABLE
To ENTER programming mode: Enter 000000.
To VIEW an operator’s current setting: A) Enter step number, B) Press # (pound sign).
To PROGRAM a command: A) Enter step number, B) Enter desired data, C) Press # (pound sign).
To EXIT programming mode: Enter 00 #.
Step
Current
Setting
Purpose
Required
Digits
Acceptable Input
01 Gate Type 1 0 - 2 (0 = Slide, 1 = Swing, 2 = Barrier)
02 Operator Type 1
0 - 2 (0 = Single, 1 = Master,
2 = Slave)
03 Gate Pair Type 1
0 - 3 (0 = Bipart, 1 = Bipart Latch,
2 = Trap, 3 = Tandem
04 Warn When 1
0 - 3
0 = moving, 1 = closing,
2 = not closed, 3 = alarm per step 23
05 Warn Time Before Moving Up to 2 0 - 30, in seconds
06 Anti-Tailgate Enable 1 0 - 1 (0 = Disabled, 1 = Enabled)
07 Latch Delay Time Up to 3 1 - 250 in 0.4 second increments
08 Reclose Time Up to 3 0 - 250, in seconds
09 Maximum Retry Count 1 0 - 2 (0 = Do not retry)
10 Retry Pause Time Up to 2 30 - 99, in seconds
11 Reverse Sense Backup Closing Up to 3 0 - 499, in inches
12 Reverse Sense Backup Opening Up to 3 0 - 499, in inches
13 Interrupt Bar Backup If Closing Up to 3 0 - 499, in inches
14 Interrupt Bar Backup If Opening Up to 3 0 - 499, in inches
15 Return Factory Set Defaults 6
101010 = Partial default reset (all except
steps 24, 26, 28, 34 and 36)
191919 = Full default reset
17 Change Password 6 Any combination of 6 digits
18 Verify Password 6 User designated password
19 Set Date And Time
11, with 2
more
optional
(for
seconds)
YYMMDDdhhmm[ss]
YY = Last two digits of year
MM = Two digits for month
DD = Two digits for date
d = One digit for week day. (1 = Sun.)
hh = Two digits for hour. (24 hr. format)
mm = Two digits for minutes
ss = Two digits for seconds (optional)
20 Rings Before Answer Up to 2 1 - 19
21 Answer Ring Override Time Up to 2 0 - 30, in seconds
22 Alert Calling 1
0 - 3,
0 = None
1 = Pager
2 = Modem
3 = Scheduled (per step 41)
23 Alert 1, Drivetrain Failure Alert 1
0 - 3
0 = None
1 = Call telephone receiver
2 = Trigger warning device,
3 = Call phone & trigger warning device
23 Alert 2, Interrupt Bar Fault Alert 1 Same as step 23
23 Alert 3, Overcurrent Fault Alert 1 Same as step 23,
23
Alert 4, Motor Protector Switch
Open Alert
1 Same as step 23
23 Alert 5, Loop Failure Alert 1 Same as step 23
23
Alert 6, Master/Slave
Communication Failure Alert
1 Same as step 23