Chamberlain AS2 eco, Operating Instructions Manual

Page: 23 / 36

11
EC - Declaration of Incorporation
Manufacturer:
Chamberlain GmbH, Alfred-Nobel-Str. 4, D-66793 Saarwellingen
We hereby declare that the products described below:
AS2eco Door Controls
are in conformity with the essential requirements of the Machinery Directive 2006/42/EC.
In addition, the partly completed machinery is in conformity with all the provisions of the EU Const-
ruction Products Regulation No. 305/2011, the Electromagnetic Compatibility Directive (2004/108/
EC) and the Low Voltage Directive (2006/95/EC).
The following standards were applied:
EN 60204-1
Safety of machinery, electrical equipment of machines – Part 1:
General requirements
EN ISO 12100 Safety of machinery - General principles for design – Risk assessment and risk
reduction
DIN EN 12453 Industrial, commercial and garage doors and gates – Safety in use of power
operated doors – Requirements
DIN EN 61000-6-2 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity
standard for industrial environments
DIN EN 61000-6-3 Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission stan
dard for residential, commercial and light-industrial environments
DIN EN 60335-1 Household and similar electrical appliances - Safety – Part 1: General requirements
DIN EN 60335-2-103 Household and similar electrical appliances - Safety – Part 2-103: Particular requi
rements for drives for gates, doors and windows
The relevant technical documentation is compiled in accordance with Annex VII(B) of the Machinery
Directive 2006/42/EC. We undertake to transmit, in response to a reasoned request by the market
surveillance authorities, this documentation in electronic form within a reasonable period of time.
The authorised agent for the preparation of the technical documentation is:
Chamberlain GmbH, Alfred-Nobel-Str. 4, D-66793 Saarwellingen
The machinery is incomplete and must not be put into service until the machinery into which is to be
incorporated has been declared in conformity with the provisions of the Machinery Directive 2006/42/
EC.
Place, Date
Saarwellingen, 02.01.2013
Manufacturer‘s signature
Christoph Marny
Position of signatory
Manager Regulatory Affairs