Challenger Techstar CVT MT525B Series, Operators Instruction Book

Page: 199 / 248

7 . ACCESSORIES AND OPTIONS
7.61 Challenger MT500B EU
7
The first icon (first action) is outlined in red (23 Fig. 131).
• Press the headland button on the armrest (22 Fig. 128)
for each action to perform. The icon outlined in red indi-
cates the next action to be performed.
• To stop reading a sequence, press the key
«
2
(STOP).
NOTE: When a PAUSE action is triggered, a buzzer
sounds (except if the volume is set to 0).
7.11.4.2 - Reading a sequence in AUTOMATIC mode
Procedure to follow:
• Press the key
«
2
(GO) when the window (Fig. 132) is
open. A new window is displayed (Fig. 133).
The first icon (first action) is outlined in red (24 Fig. 133).
• Press the headland button on the armrest (22 Fig. 128)
for 1.5 seconds to start reading the sequence. The
actions are performed sequentially at defined time inter-
vals (see Setting reading parameters). The icon outlined
in red indicates the next action to be performed.
• To stop reading a sequence, press the key
«
2
(STOP).
NOTE: When a PAUSE action is triggered, reading
stops and a buzzer sounds (except if the volume is set
to 0). To resume reading, proceed in the same manner.
IMPORTANT: If for any reason it is necessary to stop
reading the sequence, press the headland button (22
Fig. 128) again.
REC
1920
42.0
1.2
EDIT
GO
SV1 A
SV
.....
A SV1
B
SV2
Z3A-828-08-04-B
Fig. 130
OFF
1920
42.0
STOP
SV1 A
SV
.....
A SV1
B
SV2
Z3A-873-08-04-B
Fig. 131
23
ON
REC
1920
42.0
1.2
EDIT
GO
SV1 A
SV
.....
A SV1
B
SV2
Z3A-828-08-04-B
Fig. 132
OFF
1920
42.0
STOP
SV1 A
SV
.....
A SV1
B
SV2
Z3A-873-08-04-B
Fig. 133
24
ON