background image

1.1.25  Fluid penetration

Always use a board or cardboard when checking

for a leak. Leaking fluid under pressure can

penetrate the body tissue. Fluid penetration can

cause serious injury and possible death. A pin hole

leak can cause severe injury. If fluid is injected into

the skin, get treatment immediately. Get

treatment from a doctor familiar with this type of

injury.
Check the lines, the tubes and the hoses carefully.

Do not use your bare hand instead, use a board or

cardboard to check for leaks. Tighten all

connections to the recommended torque.
Replace the hose if any of the following conditions

are present:
• End fittings are damaged or leaking.
• Outer coverings are rubbed or cut.
• Wires are showing.
• Outer coverings are ballooning.
• The flexible part of the hose has a kink.
• Outer coverings have embedded armoring.
• The end fittings are displaced.

IMPORTANT: 

Take care to contain fluids during

the performance of the inspection, the

maintenance, the testing, the adjusting, and the

repair of the machine. Have a suitable container

large enough ready to collect the fluid before

opening any compartment or disassembling any

component containing fluids. See the local

regulations and mandates when discarding fluids.

Fig. 10  

1.1.26  Batteries

A lead acid battery generates flammable and

explosive gases. Keep sparks and flames away

from the battery.

WARNING: 

WARNING: Sulfuric acid in battery

electrolyte is poisonous. The acid is strong enough

to burn skin, eat holes in clothing and cause

blindness if got into eyes.

If acid contacts skin or clothing, flush with water

immediately. If acid contacts eyes get immediate

medical aid.

Fig. 11  

1. General

1-12

MT900 Series Articulated Tractor

79036231B

Find manuals at http://best-manuals.com/search?&s=CHAL-79036231

Summary of Contents for MT900 Series




















































Reviews: