Models EV1020, EV1220, EV1520
Installation, Operation and Maintenance
Rev.12/16/2020
EV-IOM-A.doc
2
General Specifications
See Page 3
EV1020
A
Rise Height (Screw Pads Highest Position)
74”
B
Overall Width
110 1/4”
C
Drive Thru
87”
D
Arm/Pad Reach (min/max)
19 5/8” Min / 42 1/8” Max
E
Overall Length (min/max)
NA
Screw Pad Height
4 1/8” Min. / 6 1/8” Max.
*Lifting Capacity
(Hydraulic Pressure at Cap.)
10,000 lbs
(2550 psi)
Max Load Per Arm/Pad
2,500 lbs
**Lifting Time
38 Sec. (approximate)
Motor
2HP, 230 Volt, Single
Phase, 60 Hz
See Page 3
EV1220
EV1520
A
Rise Height (Screw Pads Highest Position)
74” 84
1/4"
B
Overall Width
115” 71
½”
C
Drive Thru
87” NA
D
Arm Reach (min/max)
19 5/8” Min / 48” Max
26 1/4” Min./ 43" Max
Screw Pad Height
5” Min. - 6-3/4” Max.
8” – 9 3/4”(Med. Ext.)
11” – 12 3/4” (High Ext.)
6 1/2” Min. – 8 3/4” Max.
10-1/2”- 12 3/4” (Med. Ext.)
14 1/2”- 16 3/4” (High Ext.)
*Lifting Capacity
(Hydraulic Pressure at Cap.)
12,000 lbs
(2500 psi)
15,000 lbs.
(2000 psi)
Max Load Per Arm/Pad
3,000 lbs
3,750 lbs
**Lifting Time
59 Sec. (approximate)
77 Sec. (approximate)
Motor
2HP, 230 Volt, Single
Phase, 60 Hz
2HP, 230 Volt, Single
Phase, 60 Hz
* Lift capacity ratings are based on loads equally distributed on all four arms.
**Lifting and lowering speeds may vary depending on the type, viscosity and
temperature of the oil as well as vehicle weight.
Motor Optional - 2HP, 240 Volt, 3 Phase, 60 Hz
2HP, 480 Volt, 3 Phase, 60 Hz
