HELPLINE NO 08454 505299
12
ORIGINAL INSTRUCTIONS
CAUTION Water must never come
into contact with the tool.
If the supply cord of this power tool is damaged,
it must be replaced by a specially prepared cord
available through the service organisation.
PLUG REPLACEMENT
Your Power Tool is supplied with a fitted
plug, however if you need to fit a new plug
follow the instruction below.
IMPORTANT
The wires in the mains lead are coloured in
accordance with the following code:
Blue = Neutral Brown = Live
As the colours of the wires in the mains
lead of this appliance may not correspond
with the coloured markings identifying the
terminals in your plug, proceed as follows:
The wire which is coloured blue must be
connected to the terminal which is marked
with
N
.
The wire which is coloured brown must be
connected to the terminal which is marked
with the letter L.
If a 13 AMP (BS 1363/A) Plug is used, a
13 AMP Fuse must be fitted, or if any other
type of plug is used a 13 AMP Fuse must be
fitted, either in the Plug or Adaptor, or on the
Distribution Board.
Note: If a moulded plug is fitted and has to
be removed take great care in disposing
of the plug and severed cable, it must
be destroyed to prevent engaging into a
socket.
If the supply cord is damaged it must be
replaced by a service agent or a similarly
qualified person in order to avoid hazard.
