Helpline No 0844 801 8701 / IRE 189 094 6244
7
fitted before the machine is switched on.
• It must be possible for the blade to run freely.
• When working with wood that has been processed
before, watch out for foreign bodies such as nails
or screws etc.
• Before you actuate the On/Off switch, make sure
that the saw blade is correctly fitted and that the
machine’s moving parts run smoothly.
• Follow the instructions for lubrication and changing
tools.
• Keep handles dry, clean and free from oil and
grease.
• Keep the push stick or handle for a push block at
the machine at all times, even when you are not
using them.
• Do not cut rebates or grooves without fitting a
suitable guard, e.g. a tunnel-type guard, over the
saw table.
• Use only the transport device for transporting the
machine.
• While you are moving the machine it is best to
cover the top part of the blade, for example using a
guard.
Do not lose these safety instructions.
