Helpline No 0844 801 8701 / IRE 189 094 6244
11
7.
Assembly
Always pull out the power plug before carrying
out any maintenance or conversion work.
7.1
Fitting the saw blade (Fig. 2/3)
• Caution! Pull out the power plug.
• Unscrew the fixing screws (20) and remove chip
bin cover (19).
• Undo the nut (21) with a ring wrench (30) on the
nut itself and a face spanner (31) on the saw shaft
to apply counter-pressure.
• Caution! Turn the nut in the direction of rotation of
the saw blade (4).
• Take off the outer flange (22) and pull the old saw
blade (4) off the inner flange by dropping the blade
at an angle.
• Clean the mounting flange.
• Fit the new saw blade in reverse order.
• Caution! Note the direction of rotation (see arrow
on the saw blade).
Please note that the saw bench is supplied with the
saw blade (4), splitter (5) and the saw blade guard (2)
already fitted.