manualshive.com logo in svg

Challenge Xtreme CX-TS 800, Original Operating Instructions

Share
Download
Challenge Xtreme CX-TS 800 Original Operating Instructions Download Page 11

2. 

Items supplied

•  Carbide-tipped saw blade

 

•  Parallel stop

 

•  Push stick

 

•  Bench-type circular saw

 

•  Cross stop

 

•   2 x combined ring wrench / face spanners.

3. 

Proper use

The bench-type circular saw is designed for the 
slitting and cross-cutting of all types of timber, 
commensurate with the machine’s size. The machine 
is not to be used for cutting any type of roundwood. 
The machine is to be used only for its prescribed 
purpose. 
Any use other than that mentioned is considered to 
be a case of misuse. The user/operator and not the 
manufacturer shall be liable for any damage or injury 
resulting from such cases of misuse. The machine 

is to be operated only with suitable saw blades. It is 
prohibited to use any type of cutting-off wheel.  
To use the machine properly you must also observe 
the safety regulations, the assembly instructions and 
the operating instructions to be found in this manual. 
All persons who use and service the machine have to 
be acquainted with this manual and must be informed 
about its potential hazards. 
It is also imperative to observe the accident 
prevention regulations in force in your area. The 
same applies for the general rules of occupational 
health and safety. 
The manufacturer shall not be liable for any changes 
made to the machine nor for any damage resulting 
from such changes. 
Even when the machine is used as prescribed 
it is still impossible to eliminate certain residual 
risk factors. The following hazards may arise in 
connection with the machineʼs construction and 
design:

•   Contact with the saw blade in the uncovered saw 

zone.

•   Reaching into the running saw blade (cut injuries).
 •  Kick-back of workpieces and parts of workpieces
•  Saw blade fracturing.
•   Catapulting of faulty carbide tips from the saw 

blade.

•   Damage to hearing if essential ear-muffs are not 

worn.

•   Harmful emissions of wood dust when the machine 

is used in closed rooms.

Please note that our equipment has not been 
designed for use in commercial, trade or industrial 

applications. Our warranty will be voided if the 

machine is used in commercial, trade or industrial 
businesses or for equivalent purposes.

Helpline No 0844 801 8701 / IRE 189 094 6244

9

Summary of Contents for CX-TS 800























Reviews:

No comments

Brands by name

Popular brands

Load more brands