CHAINTECH CT-6LTM, User Manual, Page: 38 / 50

User's Manual
34
I. Used MEM base addr
This function devotes a space of memory (8K, 16K, 32K, 64K) for any peripheral
that has a high memory requirement. This is also used to designate memory
space for legacy ISA cards. The settings C800~DC00 are used to to designate
point at which the memory will start being used. The default setting is N/A
(disabled.)
J. Used MEM Length
8K~64K: Determines the amount of memory to be used by ISA cards mentioned
in the Used MEM base addr function above.
3-6 Load Setup Defaults
Load Setup Defaults loads the default system values directly from the CMOS Setup
Utility menu (Figure3-1). If the stored record created by the setup program becomes
corrupted and therefore unusable, these defaults will be loaded automatically when
you turn on the computer.
INTERGRATED PERIPHERALS
SUPERVISOR PASSWORD
USER PASSWORD
IDE HDD AUTO DETECTION
SAVE & EXIT SETUP
EXIT WITHOUT SAVING
STANDARD CMOS SETUP
BIOS FEATURES SETUP
CHIPSET FEATURES SETUP
POWER MANAGEMENT SETUP
PNP/PCI CONFIGURATION
LOAD SETUP DEFAULTS
: Select Item
(Shift) F2 : Color
ESC : Quit
F10: Save & Exit Setup
Load SETUP Defaults <Y/N>? N
Figure 3-8 Load Setup Defaults Screen
Load SETUP Defaults except Standard CMOS SETUP
ROM PCI / ISA BIOS (2A69JC39)
CMOS SETUP UTILITY
AWARD SOFTWARE, INC.